For jigsaws
Total length [mm]
Tooth spacing [mm]
Material
Choose a pack size
Total length [mm] 117
Tooth spacing [mm] 2.2
Material HCS
Choose a pack size 2 options
Cuts tear-free on both sides with 2-Side Clean Geometry
Extra sharp teeth produced by precision grinding
Fits tools of most brands
Fits all T-shank jigsaws
Ensuring the ‘clean side’ of a jigsaw cut is on the visible part of the work material has always been an art among joiners and woodworkers. Sometimes you can turn the workpiece over, other times the jigsaw itself can be held upside down. Or you could use the EXPERT Wood 2-side clean, that offers a perfect tear-free cut on both sides thanks to its double rows of teeth.
Available product options: 2
|
Part number
|
Material
|
Tooth design
|
Total length [mm]
|
Tooth spacing [mm]
|
Pack quantity
|
|
|---|---|---|---|---|---|---|---|
| 2 608 900 554 | HCS | ground teeth and taper ground | 117 | 2.2 | 3 Pcs | Find a local dealer | |
| 2 608 900 555 | HCS | ground teeth and taper ground | 117 | 2.2 | 5 Pcs | Find a local dealer |
out of products
| Part number 2608900554 | |
|---|---|
| Packaging type | Paper / Cardboard / Corrugated board - Packaging, folded carton, with Euro hole |
| Pack quantity | 3 Pcs |
| Details | |
|---|---|
| Material | HCS |
| Tooth design | ground teeth and taper ground |
| Total length [mm] | 117 |
| Tooth spacing [mm] | 2.2 |
| Tooth pitch [TPI] | 12 |
| Areas of application | Softwood boards (5-50 mm), plywood (5-50 mm) |
| Recommended min. material thickness [mm] | 5 |
| Recommended max. material thickness [mm] | 50 |
| Type | T 308 BO |
| Part number 2608900555 | |
|---|---|
| Packaging type | Paper / Cardboard / Corrugated board - Packaging, folded carton, with Euro hole |
| Pack quantity | 5 Pcs |
| Details | |
|---|---|
| Material | HCS |
| Tooth design | ground teeth and taper ground |
| Total length [mm] | 117 |
| Tooth spacing [mm] | 2.2 |
| Tooth pitch [TPI] | 12 |
| Areas of application | Softwood boards (5-50 mm), plywood (5-50 mm) |
| Recommended min. material thickness [mm] | 5 |
| Recommended max. material thickness [mm] | 50 |
| Type | T 308 BO |
