For reciprocating saws
Max. cut capacity [mm]
Recommended max. material thickness [mm]
Recommended min. material thickness [mm]
Choose a pack size
Max. cut capacity [mm] 150
Recommended max. material thickness [mm] 4
Recommended min. material thickness [mm] 1.5
Choose a pack size 1 Pcs
Exceptional durability is built in with Bosch Carbide Technology
Extra-fine teeth cut very thin material with ease
Fits tools of most brands
Fits all S-shank reciprocating saws
Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start when you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past.
Available product options: 1
|
Part number
|
Tooth spacing [mm]
|
Tooth pitch [TPI]
|
Total length [mm]
|
Total length [Inch]
|
Pack quantity
|
|
|---|---|---|---|---|---|---|---|
| 2 608 900 363 | 1.4 | 18 | 200 | 8 | 1 Pcs | Find a local dealer |
out of products
| Part number 2608900363 | |
|---|---|
| Packaging type | Paper / Cardboard / Corrugated board - Packaging, pocket, with Euro hole |
| Pack quantity | 1 Pcs |
| Details | |
|---|---|
| Tooth spacing [mm] | 1.4 |
| Tooth pitch [TPI] | 18 |
| Total length [mm] | 200 |
| Total length [Inch] | 8 |
| Width [mm] | 19 |
| Thickness [mm] | 1 |
| Blade material | CARBIDE |
| Blade material abbreviation | CT |
| Body material | HCS |
| Recommended min. material thickness [mm] | 1.5 |
| Recommended max. material thickness [mm] | 4 |
| Max. cut capacity [mm] | 150 |
| Areas of application | Stainless steel sheets (2-4 mm), stainless steel profiles (diameter <150 mm), glass fibre reinforced plastic/epoxy (<150 mm). Reduce the stroke rate, work without pendulum action. Use coolant. |
| Type | S 1022 EHM |
