For reciprocating saws
Max. cut capacity [mm]
Choose a pack size
Max. cut capacity [mm] 100
Choose a pack size 2 options
Exceptional durability is built in with Bosch Carbide Technology
Progressive tooth pitch to cut material of every thickness
Tapered tip reaches deeper into tight spaces
Thick gauge blade offers extra robustness and stability
Wide body for precise, straight cuts
Fits tools of most brands
Fits all S-shank reciprocating saws
Many blades advertised as being ‘for multi material’ are fine in wood and soft metal, but fail to cut tougher elements like screws or metal fittings. The EXPERT Multi Material has no such problems: its carbide teeth can cut the hardest grades of steel – again and again.
Available product options: 2
|
Part number
|
Tooth spacing [mm]
|
Tooth pitch [TPI]
|
Total length [mm]
|
Total length [Inch]
|
Pack quantity
|
|
|---|---|---|---|---|---|---|---|
| 2 608 900 389 | 3.0-4.0 | 6-8 | 150 | 6 | 1 Pcs | Find a local dealer | |
| 2 608 900 390 | 3.0-4.0 | 6-8 | 150 | 6 | 10 Pcs | Find a local dealer |
out of products
| Part number 2608900389 | |
|---|---|
| Packaging type | Paper / Cardboard / Corrugated board - Packaging, pocket, with Euro hole |
| Pack quantity | 1 Pcs |
| Details | |
|---|---|
| Tooth spacing [mm] | 3.0-4.0 |
| Tooth pitch [TPI] | 6-8 |
| Total length [mm] | 150 |
| Total length [Inch] | 6 |
| Width [mm] | 25 |
| Thickness [mm] | 1.25 |
| Blade material | CARBIDE |
| Blade material abbreviation | CT |
| Body material | HCS |
| Max. cut capacity [mm] | 100 |
| Areas of application | Wood with (hardened) nails/metal (5-100 mm), wood with steel elements (5-100 mm), cast steel pipes (diameter < 3"), glass fibre reinforced plastic / epoxy (< 100 mm) |
| Type | S 956 XHM |
| Part number 2608900390 | |
|---|---|
| Packaging type | Plastic packaging, tube, with Euro hole |
| Pack quantity | 10 Pcs |
| Details | |
|---|---|
| Tooth spacing [mm] | 3.0-4.0 |
| Tooth pitch [TPI] | 6-8 |
| Total length [mm] | 150 |
| Total length [Inch] | 6 |
| Width [mm] | 25 |
| Thickness [mm] | 1.25 |
| Blade material | CARBIDE |
| Blade material abbreviation | CT |
| Body material | HCS |
| Max. cut capacity [mm] | 100 |
| Areas of application | Wood with (hardened) nails/metal (5-100 mm), wood with steel elements (5-100 mm), cast steel pipes (diameter < 3"), glass fibre reinforced plastic / epoxy (< 100 mm) |
| Type | S 956 XHM |
