Technical Data
Angle grinder | GWS 12-125 P | GWS 12-125 S | |
|---|---|---|---|
Article number | 3 601 CA6 2.. | 3 601 CA6 0.. | |
Rated power input | W | 1200 | 1200 |
Power output | W | 630 | 630 |
Rated no-load speedA) | min–1 | 11000 | 11000 |
Speed adjustment range | min–1 | – | 2800–11000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 125 |
Grinding spindle thread | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 |
Restart protection | ● | ● | |
Soft start | ● | ● | |
Constant electronic control | ● | ● | |
KickBack Control | ● | ● | |
Speed preselection | – | ● | |
WeightB) | kg | 2.1−2.4 | 2.0−2.4 |
Protection class |
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is lower for safety reasons and according to production tolerances.
- B)
Depends on protective guard ((8), (7), (9)) and auxiliary handle ((5), (4)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.