Product features
The numbering of the product features refers to the representation of the power tool and drill stand on the graphic pages.
Diamond drill
(1) | On/off switch |
(2) | Lock-on button for on/off switch |
(3) | Spirit level for vertical alignment |
(4) | Spirit level for horizontal alignment |
(5) | Gear selector switch |
(6) | Claw coupling |
(7) | Drill spindle |
(8) | Core bitA) |
(9) | Handle (insulated gripping surface) |
(10) | Water cutoff valve |
(11) | Valve adapter |
(12) | Water connection adapter |
(13) | Dust extraction adapter |
(14) | Extraction outletA) |
(15) | Extraction hoseA) |
(16) | Portable residual current device (PRCD) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.
Drill stand for diamond drills
(17) | Star handle (insulated gripping surface) |
(18) | Screw on the drill holder |
(19) | Drill holder |
(20) | Drill column |
(21) | Upper screw of the drilling angle adjuster |
(22) | Levelling screw |
(23) | Water collection ring A) |
(24) | Lower screw of the drilling angle adjuster |
(25) | Base plate |
(26) | Rack |
(27) | Clamping nut of the drilling angle adjuster |
(28) | Feed pinion |
(29) | Locking brake |
(30) | Masonry/concrete anchorA) |
(31) | Quick-clamping spindleA) |
(32) | Wing nuts for quick-clamping spindleA) |
(33) | Water collection ring tension springA) |
(34) | Sliding guides |
(35) | Hex nut for sliding guides (x 10) |
(36) | Threaded pin for sliding guides (x 10) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.