Start-up
(GWX 18V-15 C / GWX 18V-15 SC)
To start the power tool, push the on/off switch (5) forward.
To lock the on/off switch (5) in position, push the on/off switch (5) forward and down until it clicks into place.
To switch off the power tool, release the on/off switch (5); or, if the switch is locked, briefly push the on/off switch (5) backward and down and then release it.
- Always check abrasive tools before using them. The abrasive tool must be fitted properly and be able to move freely. Carry out a test run for at least one minute with no load. Do not use abrasive tools that are damaged, run untrue or vibrate during use. Damaged abrasive tools can burst apart and cause injuries.
(GWX 18V-15 P / GWX 18V-15 PSC)
To start the power tool, push the unlocking lever (10) forwards and then push the on/off switch (5) up.
To switch off the power tool, release the on/off switch (5).
- Always check abrasive tools before using them. The abrasive tool must be fitted properly and be able to move freely. Carry out a test run for at least one minute with no load. Do not use abrasive tools that are damaged, run untrue or vibrate during use. Damaged abrasive tools can burst apart and cause injuries.
Battery charge indicator (user interface) (30) | Meaning/cause | Solution |
|---|---|---|
Green | Battery charged | – |
Yellow | Battery almost empty | Replace or charge battery soon |
Red | Battery empty | Replace or charge battery |
Power tool status indicator (35) | Meaning/cause | Solution |
|---|---|---|
Green | Status OK | – |
Yellow | Critical temperature has been reached or rechargeable battery is almost empty | Run the power tool at no load and allow it to cool down, or replace or charge the battery soon |
Illuminated red | Power tool has overheated or battery is empty | Allow the power tool to cool down, or replace or charge the battery |
Flashing red | Kickback shutdown, restart protection or impact shutdown has been triggered | Switch the power tool off and on again |
Flashing blue | (GWX 18V-15 C / GWX 18V-15 SC / GWX 18V-15 PSC)A): | – |
- A)
Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
Temperature indicator (36) | Meaning/cause | Solution |
|---|---|---|
Yellow | Critical temperature has been reached (motor, electronics, battery) | Run the power tool at no load and allow it to cool down |
Red | Power tool is overheated and will switch off | Leave the power tool to cool down |
Smartphone symbol (34) | Meaning/cause |
|---|---|
– | (GWX 18V-15 C / GWX 18V-15 SC / GWX 18V-15 PSC)A): |
- A)
Bluetooth ® Low Energy Module GCY 42 not included with the product as standard
(GWX 18V-15 C / GWX 18V-15 SC / GWX 18V-15 PSC)
In conjunction with the Bluetooth® Low Energy module GCY 42 (not included with the product as standard), the following connectivity functions are available for the power tool:
- Registration and personalisation
- Status check, output of warning messages
- General information and settings
- Management
Read the corresponding operating instructions for information about the Bluetooth® Low Energy Module GCY 42 (not included with the product as standard).
The connection of the power tool with the app must be confirmed by pressing the speed preselection button (32) on the user interface (4). The app requests this when connecting.