Sawing Autoclaved Aerated Concrete (see figures G–H)

When sawing autoclaved aerated concrete, refer to the following safety regulations:

Set down the autoclaved aerated concrete as shown in the figure and support it such that the cut does not close and the saw chain jams.

Before sawing, set up shorter autoclaved aerated concrete structures and secure them in place.

Only saw objects made of autoclaved aerated concrete. Avoid coming into contact with stones and nails because they may be hurled upwards and damage the saw chain or cause serious injuries to the user or bystanders.

Do not bring the running power tool into contact with wire fencing or the ground.

Exercise particular caution when making rip cuts because the stop (10) cannot be used. Guide the power tool at a shallow angle in order to avoid saw kickbacks.