Adding/Subtracting Values

  1. Select the length measurement function.
  2. Take the first measurement.
  3. Press the  button.
  4. Take the second measurement.
  5. Once the second measurement is completed, the end result is shown on the (e) line.

  1. Select the area measurement or volume measurement function.
  2. Take the first area measurement or volume measurement.
  3. Press the  button.
  4. Take the second area measurement or volume measurement.
  5. As soon as the second or third measurement has been completed, the area or volume is automatically calculated and displayed. The result is displayed in the result line (e). The individual measured values are in the measured value lines (d).
  6. Press the  button to show the end result of the addition.
  7. The end result is displayed in the result line (e). The results of the individual area or volume measurements are in the measured value lines (d).

  1. Press the  button to subtract values. The subsequent steps are the same as for the section on "adding values".