Technical Data
Angle Grinder | GWS 27-180 J | GWS 27-230 J | |
|---|---|---|---|
Article number | 3 601 HC4 3.. | 3 601 HC5 3.. | |
Rated power input | W | 2700 | 2700 |
Rated no-load speedA) | min–1 | 8500 | 6500 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 180 | 230 |
Grinding spindle thread | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 25 | 25 |
Soft start | ● | ● | |
Restart protection | ● | ● | |
WeightB)C) | kg | 5.8–6.9 | 6.0–7.4 |
Protection class |
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depends on protective guard ((13), (5), (24)) and auxiliary handle ((3), (28)) in use
- C)
Weight without mains connection cable and without mains plug
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.