Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Battery |
(2) | Battery release button |
(3) | Lock-off button for on/off switch |
(4) | On/off switch |
(5) | Hex key |
(6) | Spindle lock button |
(7) | Base plate |
(8) | Fastening screw for parallel guide |
(9) | Scale for mitre/bevel angles |
(10) | Wing bolt for mitre/bevel angle preselection |
(11) | Cut mark 45° |
(12) | Cut mark 0° |
(13) | Protective guard |
(14) | Handle (insulated gripping surface) |
(15) | Battery charge indicator |
(16) | Temperature monitoring/overload protection indicator |
(17) | Wing bolt for preselecting the cutting depth |
(18) | Cutting depth scale |
(19) | Adjusting lever for retracting blade guard |
(20) | Saw spindle |
(21) | Retracting blade guard |
(22) | Mounting flange |
(23) | Circular saw blade |
(24) | Clamping flange |
(25) | Clamping bolt |
(26) | “PowerLight” lamp |
(27) | Reference mark for mitre angle setting |
(28) | Fastening screw for dust extraction adapterA) |
(29) | Dust extraction adapterA) |
(30) | Dust extraction hoseA) |
(31) | Reference mark for cutting depth setting |
(32) | Parallel guide/guide rail adapterA) |
(33) | Pair of screw clampsA) |
(34) | Guide railA) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.