Technical Data
Impact Drill | GSB 1600 RE | |
|---|---|---|
Article number | 3 601 B28 2.. | |
Rated power input | W | 750 |
Max. power output | W | 456 |
No-load speed | min–1 | 3,250 |
Impact rate | min–1 | 48,500 |
Rated torque | Nm | 2.1 |
Spindle collar diameter | mm | 43 |
Max. drilling diameter | ||
| mm | 16 |
| mm | 12 |
| mm | 25 |
Speed control | ● | |
Clockwise/anticlockwise rotation | ● | |
Chuck capacity | mm | 1.5–13 |
WeightA) | kg | 1.8 |
Protection class |
| |
/ II- A)
Weight without mains connection cable and without mains plug
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occasional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Zactual = Ω. The user must make sure, that the connection point, with the impedance Zmax, on which the appliance shall be plugged in meets the impedance requirement: Zactual ≥ Zmax. If Zmax is unknown, determine Zmax in consultation with the network supplier or supply authority.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.