Safety Instructions for Band Saws

Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessories contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.

Keep hands away from the sawing area. Do not reach under the workpiece. Contact with the saw blade can lead to injuries.

Only bring the power tool into contact with the workpiece when switched on. Otherwise there is danger of kickback if the cutting tool jams in the workpiece.

When the cut is completed, switch off the power tool and then pull the band saw blade out of the cut only after it has come to a standstill. In this manner you can avoid kickback and can place down the power tool securely.

Use only undamaged band-saw blades that are in perfect condition. Bent or dull band-saw blades can break or lead to kickback.

Keep lubricants or oil away from the band-saw blade. Completely wipe off excess oil before cutting. Otherwise, the band-saw blade can slip.

Do not apply strong pressure to the band-saw blade during operation. Excessive pressure can cause the band-saw blade to slip or break. This poses a risk of injury.

After switching off, do not stop the band-saw blade by applying lateral pressure to it. The band-saw blade can become damaged, break or lead to kickback.

Do not touch the band-saw blade directly after the working process until after it has cooled down. The band-saw blade becomes very hot while working.

Hold the power tool firmly with both hands and make sure you have a stable footing. The power tool can be more securely guided with both hands.

Always wait until the power tool has come to a complete stop before placing it down. The application tool can jam and cause you to lose control of the power tool.

In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.

Do not open the battery. There is a risk of short-circuiting.

The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.

Only use the battery in the manufacturer's products. This is the only way in which you can protect the battery against dangerous overload.

Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.