Technical Data
Angle grinder | GWS 30-180 B | GWS 30-230 B | GWS 30-180 PB | GWS 30-230 PB | GWS 30-230 B | |
|---|---|---|---|---|---|---|
Article number | 3 601 HG0 0.. | 3 601 HG1 0.. | 3 601 HG0 1.. | 3 601 HG1 1.. | 3 601 HG1 0.. | |
Rated power input | W | 2800 | 2800 | 2800 | 2800 | 2200 |
Rated no-load speedA) | min–1 | 8500 | 6500 | 8500 | 6500 | 6500 |
Max. grinding disc diameter/rubber backing pad diameter | mm | 180 | 230 | 180 | 230 | 230 |
Grinding spindle thread | M 14 | M 14 | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 25 | 25 | 25 | 25 | 25 |
KickBack Control | ● | ● | ● | ● | ● | |
Restart protection | ● | ● | ● | ● | ● | |
Soft start | ● | ● | ● | ● | ● | |
Run-out brake | ● | ● | ● | ● | ● | |
Status indicator (LED) | ● | ● | ● | ● | ● | |
PROtection switch | – | – | ● | ● | – | |
WeightB)C) | kg | 5,7–7,5 | 5,9–8,4 | 5,7–7,5 | 5,9–8,4 | 5,9–8,4 |
Protection class |
|
|
|
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depends on protective guard ((17), (18), (8), (9), (19)), auxiliary handle ((5), (6)) and extraction guard (34) in use
- C)
Weight without mains connection cable and without mains plug
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.