Changing the Sanding Pad

Note: Replace damaged sanding pads (11) immediately.

Remove the sanding sheet or polishing tool. Unscrew the screw (10) completely and remove the sanding pad (11). Attach the new sanding pad (11) and retighten the screw so that it is finger-tight.

Note: Pads with diameters of 150 mm and 125 mm have different carriers. The pads can only be fitted to the right power tool.

Note: When attaching the sanding pad, make sure that the teeth of the catch mate with the recesses in the sanding pad.

Note: Damaged sanding pads must only be replaced by an after-sales service centre authorised to work with Bosch power tools.