Changing the Sanding Sheet

To remove the sanding sheet (8), lift it from the side and pull it from the sanding pad (11).

Remove dirt and dust from the sanding pad (11), e.g. with a paintbrush, before attaching a new sanding sheet.

The surface of the sanding pad (11) is fitted with a hook-and-loop fastening, allowing sanding sheets with a hook-and-loop backing to be secured quickly and easily.

Press the sanding sheet (8) firmly onto the underside of the sanding pad (11).

To ensure optimum dust extraction, make sure that the punched holes in the sanding sheet (8) are aligned with the drilled holes in the sanding pad (11).