Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
|
(1) |
Locking lever |
(2) | Laser protection cap |
(3) | Spindle lock |
(4) | Retracting blade guard |
(5) | Chip box |
(6) | Angle guide |
(7) | Locking spindle |
(8) | Quick release |
(9) | Spindle handle |
(10) | Clamping lever of the saw table extension |
(11) | Saw table extension |
(12) | Hex key (6 mm)/cross-headed screwdriver |
(13) | Clamping handle for mounting the angle guide |
(14) | Transport safety lock |
(15) | Protective guard |
(16) | Handle |
(17) | On/off switch |
(18) | Laser warning label |
(19) | On/off switch for laser (cutting line indication) |
(20) | Transport handle |
(21) | Cover plate |
(22) | Bracket |
(23) | Mounting holes |
(24) | Chip drawer |
(25) | Saw table |
(26) | Lower fastening screw (cover plate/retracting blade guard) |
(27) | Upper fastening screw (cover plate/retracting blade guard) |
(28) | Guide bolt |
(29) | Hex socket screw for mounting the saw blade |
(30) | Clamping flange |
(31) | Saw blade |
(32) | Inner clamping flange |
(33) | Angle indicator |
(34) | Scale for mitre angles |
(35) | Set screw for laser positioning (parallelism) |
(36) | Screw for angle indicator |
(37) | Laser beam output |