Storage and transport (see figure I)

• Empty and clean the container (1). To avoid mould formation, ensure that the pleated filter (28) and the inside of the dust extractor are dry.
• Wrap the power cable around the cable holder (13).
• Insert the accessories into the holders provided for them: Dust extraction adapter (18) into the holder (12), crevice nozzle (23) into the holder (15), coarse dirt nozzle (22) into the holder (16).
• Place the vacuum hose (17) in the holder (14) around the top part of the vacuum cleaner.
• Carry the vacuum cleaner by the carrying handle (5).
• Store the dust extractor in a dry room and secure it so that it cannot be used by unauthorised persons.
• Put the castor brake (10) down to hold the castors (9) in place.