Technical Data
Angle Grinder | GWS 12-115 | GWS 12-125 | |
---|---|---|---|
Article number | 3 601 CA6 1.. | 3 601 CA6 1.. | |
Rated power input | W | 1200 | 1200 |
Power output | W | 690 | 690 |
Rated no-load speedA) | min–1 | 11,000 | 11,000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 115 | 125 |
Grinding spindle thread | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 |
Restart Protection | ● | ● | |
Weight according to EPTA-Procedure 01:2014B) | kg | 2.0–2.2 | 2.0–2.4 |
Protection class | / II | / II |
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depends on protective guard ((8), (7), (9)) and auxiliary handle ((5), (4)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.