Working advice

Protect the saw blade against impact and shock. Do not subject the saw blade to lateral pressure.

Do not saw warped/bent workpieces. The workpiece must always have a straight edge to face against the fence.

The free end of long and heavy workpieces must have something placed underneath it or be supported.

Maximum workpiece dimensions:

Workpiece shape

Mitre angle

0°

45°

Dia. 115

Dia. 90

100 x 100

85 x 85

158 x 80

85 x 85

110 x 110

85 x 85

Minimum workpiece dimensions
(= all workpieces that can still be clamped in place with the locking spindle (7)): Length 80 mm

Max. cutting depth (0°/0°): 115 mm

The dust from materials such as lead paint, minerals and metal can be harmful to human health. Touching or breathing in this dust can trigger allergic reactions and/or cause respiratory illnesses in the user or in people in the near vicinity.

Certain kinds of metal dust are hazardous, especially in combination with alloys such as zinc, aluminium or chrome. Materials containing asbestos may only be machined by specialists.

  • Provide good ventilation at the workplace.
  • It is advisable to wear a P2 filter class breathing mask.

The regulations on the material being machined that apply in the country of use must be observed.

The saw blade (31) can become blocked by dust, chips or workpiece fragments in the recess of the saw table (25).

  • Switch the power tool off and pull the mains plug out of the socket.
  • Wait until the saw blade has come to a complete stop.
  • Pull out the chip drawer (24) and empty it completely.
  • Avoid dust accumulation at the workplace. Dust can easily ignite.