Symbols
The following symbols may be important for the operation of your power tool. Please take note of these symbols and their meaning. Correctly interpreting the symbols will help you to operate the power tool more effectively and safely.
Symbols and their meaning | |
|---|---|
| Laser radiation |
| Keep hands away from the cutting area while the power tool is running. Contact with the saw blade can lead to injuries. |
| Wear a dust mask. |
| Wear safety goggles. |
| Wear hearing protection. Exposure to noise can cause hearing loss. |
| Danger area! Keep hands, fingers and arms away from this area. |
| Take note of the dimensions of the saw blade. The hole diameter must match the tool spindle without play. Do not use a reducer or adapter. |
| When changing the saw blade, make sure that the cutting width is no smaller than 2.0 mm and the base blade thickness is no larger than 2.0 mm. Otherwise, there is a risk that the riving knife (2.0 mm) will hook into the workpiece. When using the combination saw as a table saw, the maximum workpiece height is 51 mm. |
| Symbol on the bracket (11) to swivel and lock the retracting blade guard |
| Symbol for using the combination saw as a mitre saw |
| Symbol for using the combination saw as a table saw |
