Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Dust bag |
(2) | Protective guard |
(3) | Transport handle |
(4) | Handle |
(5) | Lock-off function for On/Off switch |
(6) | Laser warning label |
(7) | Retracting blade guard |
(8) | Fence |
(9) | Workpiece support (flexibly pluggable) |
(10) | Saw table |
(11) | Locking knob for all mitre angles |
(12) | Mitre pre-setting lever |
(13) | Angle indicator for mitre angles |
(14) | Scale for mitre angles |
(15) | Screw clamp |
(16) | Folding fence |
(17) | Guide roller |
(18) | Chip deflector |
(19) | On/off switch |
(20) | On/Off switch for laser (cutting line indication) |
(21) | Holes for screw clamp |
(22) | Chip ejector |
(23) | Mounting holes |
(24) | Clamping bolt for all bevel angles |
(25) | Transport safety lock |
(26) | Recessed handles |
(27) | Spindle lock |
(28) | Hex key |
(29) | Laser beam outlet aperture |
(30) | Angle indicator for bevel angles |
(31) | Scale for bevel angles |
(32) | Guide rail for length gauge |
(33) | Clamping screw for length stop |
(34) | Wing bolt for fixing the guide rail for length gauge |
(35) | Length stop |
(36) | Insert plate |
(37) | Hex socket screw for mounting the saw blade |
(38) | Clamping flange |
(39) | Saw bladeA) |
(40) | Inner clamping flange |
(41) | Wing bolt for adjusting the height of the threaded rod |
(42) | Threaded rod |
(43) | Wing bolt for screw clamp |
(44) | Screw clamp pins |
(45) | Detents for standard mitre angles |
(46) | Screws for insert plate |
(47) | Set screw for positioning the laser |
(48) | Set square |
(49) | Hex socket screw for fence |
(50) | Stop screw for 0° bevel angle |
(51) | Stop screw for 45° bevel angle |
(52) | Screw for bevel angle indicator |
(53) | Screw for mitre angle indicator |
- A)
This accessory is not part of the standard scope of delivery.