Changing the Tool
GDR 18V-200 / GDX 18V-200:
Pull the locking sleeve (2) forward, guide the application tool (1) into the tool holder as far as it will go and release the locking sleeve (2) to lock the application tool.
Impact-proof screwdriver bits (12) can be inserted using a universal bit holder (11) with ball catch.
GDX 18V-200 / GDS 18V-200:
- When fitting an application tool, make sure that it is held securely in the tool holder. If the application tool is not held securely in the tool holder, it may become loose and consequently uncontrollable.
Slide the application tool (13) onto the square drive of the tool holder (1).
Due to the way the system operates, the application tool (13) will move around slightly in the tool holder (1); this has no influence on the function/safety.
Some application tools (e.g. double bits) cannot be safely secured in the tool holder.