Filling/Emptying the Magazine (see figure B)
- Be careful when handling nails, especially when loading and unloading. The nails have sharp points which may result in personal injury.
- Only use nails that have been recommended by Bosch for your power tool. Using unapproved nails can damage the power tool and cause injuries.
During any work on the magazine, hold the power tool in such a manner that the outlet (18) is not pointed at your body or at other persons.
Select nails suited to the intended application:
Designation | Order number | Suitable for | Length (mm) | Diameter (mm) | Material | Nail strip colour | |
---|---|---|---|---|---|---|---|
Shank | Head | ||||||
NB‑16 | 1 600 A02 F4K | Concrete | 16 | 2.7 | 6.25 | High-carbon steel, electrogalvanised | Blue |
NB‑19 | 1 600 A02 F4L | 19 | |||||
NB‑25 | 1 600 A02 F4M | 25 | |||||
NB‑32 | 1 600 A02 F4N | 32 | |||||
NB‑38 | 1 600 A02 F4P | 38 | |||||
NK‑35 | 1 600 A02 F4R | 35 | 2.7 | ||||
NM‑13 | 1 600 A02 F4S | Steel | 13 | 3 | Black | ||
NM‑16 | 1 600 A02 F4T | 16 | |||||
NM‑19 | 1 600 A02 F4U | 19 | |||||
GNB 18V-40: | |||||||
NB‑40 | 1 600 A02 R7F | Concrete | 40 | 2.7 | 6.25 | High-carbon steel, electrogalvanised | Blue |
Filling the Magazine:
- If necessary, clean the magazine slider (14) and magazine (12), e.g. with a paintbrush.
- Press the button (15) on the magazine slider (14) and slide it towards the magazine opening until it engages.
- Push a suitable nail strip (22) into the magazine opening. The standard magazine can be filled with maximum 2 nail strips and the extended magazine (accessory) can be filled with 4.
- Press the button (15) on the magazine slider (14) and slide it forwards as far as it will go.
Note: If only 2 nails are contained in the magazine (12), the contact element (17) can no longer be pressed and no discharging procedure is triggered. Fill up the magazine.
Emptying the Magazine:
- Press the button (15) on the magazine slider (14) and slide it towards the magazine opening until it engages.
- Rotate the magazine so that the nail strip (22) can slide out of the magazine opening.