Additional safety instructions and working advice

• If the application tool should become blocked, switch the power tool off. Loosen the application tool.

• Switching on when the drilling tool is blocked may cause high torque reactions.

• Avoid switching on the tool accidentally. Make sure that the on/off switch is set to the off position before inserting a battery. Accidents can occur as a result of carrying the power tool with your finger on the on/off switch or inserting the battery while the power tool is switched on.

• Read and strictly observe the safety instructions in the operating instructions of the cordless drill/driver.

• Always make sure that you maintain a safe distance. When operating the power tool in high up areas, e.g. on a ladder, ensure that no one is beneath you.

• Never touch the application tool or parts of the power tool near to the application tool after use; these may be extremely hot. There is a risk of burns.