Maintenance and Cleaning

Before carrying out any work on the power tool (e.g. maintenance, tool change etc.), remove the battery from the power tool. There is risk of injury from unintentionally pressing the on/off switch.

To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.

If necessary, clean and grease the guides. Use only non-resinous oil for this purpose (e.g. sewing machine oil).

Retightening the Clamping Lever

You can readjust the clamping force of the clamping levers (3) and (12) as required. To do this, loosen the clamping levers and unscrew them. Position the clamping lever, offset at least 30° anticlockwise, and retighten it.