Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Handle (insulated gripping surface) |
(2) | On/off switch |
(3) | Angle guide clamping lever |
(4) | Height scale |
(5) | Angle scale |
(6) | Horizontal centre mark |
(7) | Anti-slip protection |
(8) | Adjustment knob for the height-adjustable stop |
(9) | Height-adjustable stop |
(10) | Routing width mark |
(11) | Vertical centre mark |
(12) | Clamping lever for the height-adjustable stop |
(13) | Direction of rotation arrow on housing |
(14) | Spindle lock button |
(15) | Auxiliary handle (insulated gripping surface) |
(16) | Rechargeable batteryA) |
(17) | Clip-on plate |
(18) | Angle guide |
(19) | Adjustment knob for routing depth |
(20) | Locking nut for routing depth adjustment |
(21) | Adjusting screw for routing depth adjustment |
(22) | Extraction outlet |
(23) | Dust bag |
(24) | Two-hole spanner |
(25) | Clamping nut |
(26) | Side milling cutter |
(27) | Direction of rotation arrow for side milling cutter |
(28) | Centring collar on the mounting flange |
(29) | Mounting flange |
(30) | Routing spindle |
(31) | Direction of rotation arrow for routing spindle |
(32) | Lock washer for the base plate |
(33) | Clamping screw for the base plate |
(34) | Base plate |
(35) | Rechargeable battery release buttonA) |
- A)
This accessory described here is not included with the product as standard. The items included are indicated on the packaging.