Technical Data
Biscuit Jointer | GFF 18V-22 | |
|---|---|---|
Article number | 3 601 F20 1.. | |
Rated voltage | V= | 18 |
Rated no-load speedA) | min–1 | 11000 |
Max. routing depthB) | mm | 22 |
Spindle thread | mm | M10 x 1.25 |
Side milling cutter drilling diameter | mm | 22 |
Max. diameter of side milling cutter | mm | 105 |
Max. thickness of side milling cutter | mm | 4 |
Weight according to EPTA-Procedure 01:2014C) | kg | 3.0–4.0 |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operationD) and during storage | °C | –15 to +50 |
Recommended rechargeable batteries | GBA 18V... | |
Recommended battery chargers | GAL 18... |
- A)
The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
achieved with a side milling cutter with a 105 mm diameter
- C)
Depending on battery in use
- D)
Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.