Technical Data
Pressing machine | GPT 18V‑19 | GPT 18V‑32 | |
|---|---|---|---|
Article number | 3 601 JM2 000 | 3 601 JM2 100 | |
Rated voltage | V | 18 | 18 |
Max. pressing force Fmax | kN | 21 | 34 |
Pressing timeA) | s | 3 | 5 |
Tool holder turning range | ° | 360 | 360 |
Pressing area | |||
| mm | 40 | 110 |
| mm | 35 | 54 |
WeightC) | kg | 2.5 | 3.4 |
Dimensions (lengthD) × width × height) | mm | 395 × 105 × 150 | 486 × 105 × 136 |
Recommended ambient temperature during charging | °C | 0 … +35 | 0 … +35 |
Permitted ambient temperature during operation | °C | +5 … +50 | +5 … +50 |
Permitted ambient temperature during storage | °C | –20 … +50 | –20 … +50 |
Recommended rechargeable batteries | GBA 18V… | GBA 18V… | |
Recommended battery chargers | GAL 18… | GAL 18… | |
- A)
measured with press jaw SV18 or SV28
- B)
Fittings of 110 mm can only be pressed with rechargeable batteries with a capacity of at least 4.0 Ah.
- C)
Without rechargeable battery, without press jaw
- D)
with a screwed-in tool holder
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.