Technical Data
Europe
Angle Grinder | GWS 18V-10 P | GWS 18V-10 P | |
|---|---|---|---|
Article number | 3 601 JJ4 1B. | 3 601 JJ4 1.. | |
Rated voltage | V= | 18 | 18 |
Rated no-load speedA) | min-1 | 9000 | 9000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 100 | 125 |
Grinding spindle thread | M 10 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 |
Kickback stop | ● | ● | |
Restart protection | ● | ● | |
Run-out brake | ● | ● | |
Weight according to EPTA-Procedure 01:2014B) | kg | 2.3–3.2 | 2.5–3.3 |
Recommended ambient temperature during charging | °C | 0 to +35 | 0 to +35 |
Permitted ambient temperature during operationC) and during storage | °C | –20 to +50 | –20 to +50 |
Compatible rechargeable batteries | GBA 18V... | GBA 18V... | |
Recommended rechargeable batteries | GBA 18V... ≥ 4.0Ah | GBA 18V... ≥ 4.0Ah | |
Recommended chargers | GAL 18... | GAL 18... |
- A)
Rated no-load speed for the selection of appropriate grinding tools in accordance with EN 60745. The actual speed is lower for safety reasons.
- B)
Depends on rechargeable battery, protective guard, and auxiliary handle in use
- C)
Limited performance at temperatures < 0 °C