Setting the Height-Adjustable Stop

Using the height-adjustable stop (9), you can specify the distance between the top of the workpiece and the slot being routed.

To attach the height-adjustable stop (9), place it on the angle guide (18) and turn it into the guide groove of the angle guide using the adjustment knob (8).

Note: Do not apply force to attach it. If correctly positioned, the stop (9) runs smoothly.

To ensure the slot is positioned in the centre of a workpiece, you must set the height-adjustable stop at half the workpiece thickness.
Example: For an 18 mm thick workpiece, set the height scale at 9 mm.

To remove the height-adjustable stop (9), loosen the clamping lever (12) and unscrew the stop, with the adjustment knob (8) facing upwards, all the way out of the angle guide (18).