Working Advice

Check the environment that you want to inspect, paying particular attention to obstacles or hazardous areas.

Bend the camera cable (1) so that the camera head can be easily introduced into the environment to be inspected. Carefully introduce the camera cable.

Adjust the brightness of the camera illumination light (3) so that the image is easily recognisable. When photographing highly reflective objects, for example, you can achieve better results in lower light or using black and white contrast setting.

If objects to be inspected look blurred, then reduce or increase the distance between camera head (2) and object.

Errors – causes and corrective measures

Error indicator in the display

Cause

Corrective measures

(yellow warning)

Internal memory almost full

Delete the files from the internal memory or insert a micro-SD card (20).

(red warning)

Internal memory full

Delete the files from the internal memory or insert a micro-SD card (20).

Error in the internal memory

Restart the inspection camera.

If the problem persists, contact an authorised Bosch after-sales service centre.

(yellow warning)

Micro-SD card almost full

Delete the files from the micro-SD card (20).

(red warning)

Micro-SD card full

Delete the files from the micro-SD card (20).

Error in the micro-SD card

Remove the micro-SD card (20) and insert it again.

Check the micro-SD card in a different device.