Technical Data
Angle grinder | GWS 18-125 L | GWS 18-125 PL | GWS 18-125 SL | GWS 18-125 SPL | |
|---|---|---|---|---|---|
Article number | 3 601 GA3 0.. | 3 601 GA3 1.. | 3 601 GA3 2.. | 3 601 GA3 3.. | |
Rated power input | W | 1800 | 1800 | 1800 | 1800 |
Power output | W | 1145 | 1145 | 1145 | 1145 |
Rated no-load speedA) | min–1 | 12,000 | 12,000 | 12,000 | 12,000 |
Speed adjustment range | min–1 | – | – | 2800–12,000 | 2800–12,000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 125 | 125 | 125 |
Grinding spindle thread | M 14 | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 | 22 | 22 |
KickBack Control | ● | ● | ● | ● | |
Restart protection | ● | ● | ● | ● | |
Soft start | ● | ● | ● | ● | |
Constant electronic control | ● | ● | ● | ● | |
Speed preselection | – | – | ● | ● | |
WeightB) | kg | 2.4–2.7 | 2.4–2.7 | 2.4–2.7 | 2.4–2.7 |
Protection class |
|
|
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depends on protective guard ((11), (10), (12)) and auxiliary handle ((7), (6)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.
Angle Grinder | GWS 18-125 L Inox | GWS 18-125 PL Inox | GWS 18-150 L | |
|---|---|---|---|---|
Article number | 3 601 GA4 0.. | 3 601 GA4 1.. | 3 601 GA5 0.. | |
Rated power input | W | 1800 | 1800 | 1800 |
Power output | W | 1145 | 1145 | 1145 |
Rated no-load speedA) | min–1 | 8100 | 8100 | 10,000 |
Speed adjustment range | min–1 | – | – | – |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 125 | 150 |
Grinding spindle thread | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 | 22 |
KickBack Control | ● | ● | ● | |
Restart protection | ● | ● | ● | |
Soft start | ● | ● | ● | |
Constant electronic control | ● | ● | ● | |
Speed preselection | – | – | – | |
WeightB) | kg | 2.5–2.8 | 2.5–2.8 | 2.4–2.8 |
Protection class |
|
|
|
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depends on protective guard ((11), (10), (12)) and auxiliary handle ((7), (6)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.