Operation with Non-Rechargeable Batteries (accessory)

It is recommended that you use alkaline manganese batteries to operate the measuring tool.

Put the non-rechargeable batteries into the battery adapter (8). When inserting the non-rechargeable batteries, ensure that the polarity is correct according to the illustration on the inside of the battery adapter.

Always replace all the batteries at the same time. Only use batteries from the same manufacturer and which have the same capacity.

Put the battery adapter (8) in the measuring tool and turn the rotary lock (7) so that you can push down the square eyelet on the battery adapter.

To remove the battery adapter (8), pull up the square eyelet on the rotary lock (7) and turn it by 90°. Take the battery adapter out of the measuring tool.

Take the batteries out of the measuring tool when you are not using it for a prolonged period of time. The batteries can corrode during prolonged storage in the measuring tool.