Auxiliary handle

Do not operate your power tool without the auxiliary handle (4).

You can swivel the auxiliary handle (4) to any angle for a safe work posture that minimises fatigue.

Loosen the knurled nut (5), rotate the auxiliary handle (4) to the required position and retighten the knurled nut (5).

The auxiliary handle (4) can be refitted in a different position.

To do this, completely unscrew the knurled nut (5) and then pull the hexagon bolt upwards and out.
Pull off the auxiliary handle (4) to the side and rotate the remaining clamping element by 180°.
Fit the auxiliary handle (4) by following the steps in reverse order.