Maintenance and Cleaning

Lubricate the Bowden cable of the angle adjustment regularly with a little penetrating oil.

The pivot axis can be greased using the lubricating nipple (1).

Readjust the Bowden cable of the angle adjustment if the locking bolt of the angle adjustment can no longer be securely loosened (see figure I):

• Ensure that the Bowden cable is not kinked.
• Loosen the lock nut (18) with pliers.
• Set the length of the Bowden cable with the adjustment screw (19).
• Retighten the lock nut (18).
• Tighten the adjustment screw (17) with a hex key of 2 mm, in order to eliminate play from the Bowden cable. Please note when doing so that a little play at the Bowden cable is normal.