Locking the Glide Arm

The glide mechanism of the glide arm (27) can be locked with the clamping lever (24). The glide arm can be placed in two positions:

• Glide arm pushed all the way back (for cross cuts)
• Glide arm pulled all the way forward (for a compact transport position)

Unlocking the Glide Arm (see figure B1)

After unlocking the glide arm (27), the whole gliding mechanism is ready for operation.

• Press the clamping lever (24) all the way down.
• The clamping wedge of the clamping lever releases the two articulated parts at the bottom of the glide arm.

Securing the Glide Arm (see figure B2)

Glide arm pushed all the way back:

• Push the glide arm (27) all the way back.
• The two articulated parts at the top of the glide arm are now upright and closed.
• Pull the clamping lever (24) upwards until the clamping wedge is positioned between the two articulated parts at the bottom of the glide arm.
• This locks the glide arm (27), which is pushed all the way back.

Glide arm pulled all the way forward:

• Pull the glide arm (27) all the way forward.
• The glide mechanism is now completely extended.
• Pull the clamping lever (24) upwards until the clamping wedge is positioned between the two articulated parts at the bottom of the glide arm.
• This locks the glide arm (27), which is pulled all the way forward.