User interface (see figure L)

The user interface (8) is used to select the working mode and to indicate the status of the power tool.

Status indications

Battery charge indicator (user interface) (22)

Meaning/cause

Solution

Green (2 to 5 bars)

Battery charged

–

Yellow (1 bar)

Battery almost empty

Replace or charge battery soon

Red (1 bar)

Battery empty

Replace or charge battery

Power tool status indicator (29)

Meaning/cause

Solution

Green

Status OK

–

Yellow

Critical temperature has been reached or rechargeable battery is almost empty

Allow the power tool to cool down, or replace or charge the battery

Red

Power tool has overheated or rechargeable battery is empty

Allow the power tool to cool down, or replace or charge the battery

Red

Motor is jammed, battery too weak

Charge the battery or use the recommended battery type

General error

  • Turn the power tool off and on again, or remove the battery and reinsert it

If the error persists:

  • Send the power tool to the after-sales service

Flashing red

Rapid shut-off is triggered

Turn the power tool off and on again

Flashing blue

Power tool is connected to a mobile device via Bluetooth®
or
settings are being transferred

–

Smartphone symbol (28)

Meaning/cause

Solution

white

Important information available (e.g. temperature warning)

Read the message on the smartphone

Selecting the working mode

Press the (26) button for selecting the working mode repeatedly until the working mode you require lights up.

Note: In Favourite working mode, the functions are configured via the smartphone app, while the functions are preset in Auto and Soft working modes.

Working mode (25) indicator

Functions

Maximum performance indicator (27) lights up

In Auto working mode, the power tool reaches maximum performance with maximum ramp-up speed.

Speed configuration via smartphone app indicator (23) lights up

In Favorite working mode, the performance and ramp-up speed of the power tool can be individually configured via a smartphone app.

Reduced performance indicator (24) lights up

In Soft working mode, the performance and ramp-up speed of the power tool are reduced.