Safety Instructions for Cordless Caulking Guns

Do not continue to press the On/Off switch after the caulking gun has been automatically switched off. This can damage the battery.

When working with the cordless caulking gun, use the personal protective equipment recommended by the manufacturer of the consumable. You can find information about this in the safety data sheet for the consumable. Always wear safety goggles and gloves that are suitable for handling chemical substances. Depending on the material, further protective measures may be necessary.

This power tool may only be used to dispense sealants and adhesives from standard sachets (foil bags) and cartridges. Dispensing other types of materials or using customer-specific packaging systems is strictly prohibited.

When working with volatile or hazardous substances, ensure that the workplace is sufficiently ventilated and that suitable breathing apparatus is worn if necessary.

Ensure that the sachets (foil bags) and cartridges are the right size for this power tool. Ensure that the sachets (foil bags) and cartridges fit well in the barrel for sachets (foil bags)/cartridges and that this barrel is securely attached to the power tool. Only then should you begin to dispense material.

Never try to dispense material from an incorrectly aligned or blocked cartridge.

To prevent hazards caused by parts flying around, ensure that the power tool is never operated with loose front barrel caps. If the dispensing nozzle becomes blocked during use, you must replace it.

Never point the power tool at yourself or anyone else during use.

In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.

Do not modify or open the battery. There is a risk of short-circuiting.

The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.

Only use the battery in the manufacturer's products. This is the only way in which you can protect the battery against dangerous overload.

Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.