Symbols

Class 1
Consumer Laser Product

Keep hands away from the cutting area while the power tool is running. Contact with the saw blade can lead to injuries.

Wear a dust mask.

Wear safety goggles.

Wear hearing protection. Exposure to noise can cause hearing loss.

Danger area! Keep hands, fingers and arms away from this area.

Keep your fingers away from the moving parts of the glide arm. There is a risk of fingers being crushed and severely injured.

Take note of the dimensions of the saw blade (saw blade diameter D, hole diameter d). The hole diameter d must match the tool spindle without play. If it is necessary to use reducers, ensure that the dimensions of the reducer are suitable for the base blade thickness and the saw blade hole diameter, as well as the tool spindle diameter. Wherever possible, use the reducers provided with the saw blade.

The saw blade diameter D must match the information specified on the symbol.

See also: "Dimensions of suitable saw blades" in the "Technical Data" section.

Shows the rotational direction of the SDS bolt for tightening the saw blade (anticlockwise) and for loosening the saw blade (clockwise).

When transporting the power tool, hold it only at the locations indicated (recessed handles) or by the transport handle.

Never carry the power tool using the handle of the glide arm.

For bevel angles, you need to adjust the left/right fence extension or completely remove it.

In combination with the ProCORE18V rechargeable batteries, the new high-performance motor offers a comparable performance to that of the motors of corded power tools.

Clamping handle open:
Bevel angles can be adjusted.

Clamping handle closed:
The set bevel angle of the glide arm is locked.

Indicates the individual steps for adjusting the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the left
3. Set the required bevel angle range using the rotary knob

Setting the bevel angle ranges using the rotary knob:

Saw blade inclination to the left (45° to 0°)

Saw blade inclination to the right (0° to 45°)

Entire swivel range of the glide arm (-47° to +47°)

Class 1 laser product

Keep hands away from the cutting area while the power tool is running. Contact with the saw blade can lead to injuries.

Wear a dust mask.

Wear safety goggles.

Wear hearing protection. Exposure to noise can cause hearing loss.

Danger area! Keep hands, fingers and arms away from this area.

Keep your fingers away from the moving parts of the glide arm. There is a risk of fingers being crushed and severely injured.

Take note of the dimensions of the saw blade (saw blade diameter D, hole diameter d). The hole diameter d must match the tool spindle without play. If it is necessary to use reducers, ensure that the dimensions of the reducer are suitable for the base blade thickness and the saw blade hole diameter, as well as the tool spindle diameter. Wherever possible, use the reducers provided with the saw blade.

The saw blade diameter D must match the information specified on the symbol.

See also: "Dimensions of suitable saw blades" in the "Technical Data" section.

Shows the rotational direction of the SDS bolt for tightening the saw blade (anticlockwise) and for loosening the saw blade (clockwise).

When transporting the power tool, hold it only at the locations indicated (recessed handles) or by the transport handle.

Never carry the power tool using the handle of the glide arm.

For bevel angles, you need to adjust the left/right fence extension or completely remove it.

In combination with the ProCORE18V rechargeable batteries, the new high-performance motor offers a comparable performance to that of the motors of corded power tools.

Clamping handle open:
Bevel angles can be adjusted.

Clamping handle closed:
The set bevel angle of the glide arm is locked.

Indicates the individual steps for adjusting the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the left
3. Set the required bevel angle range using the rotary knob

Setting the bevel angle ranges using the rotary knob:

Saw blade inclination to the left (45° to 0°)

Saw blade inclination to the right (0° to 45°)

Entire swivel range of the glide arm (-47° to +47°)