Technical Data
Cordless Impact Wrench
| GDS 18V-330 HC | |
|---|---|---|
Article number | 3 601 JL5 0.. | |
Rated voltage | V= | 18 |
No-load speedA)B) | ||
| min–1 | 1 200 |
| min–1 | 1 900 |
| min–1 | 2 800 |
Impact rateA)B) | ||
| min–1 | 2 400 |
| min–1 | 3 100 |
| min–1 | 3 800 |
TorqueA)B) | ||
| Nm | 200 |
| Nm | 260 |
| Nm | 330 |
Max. tightening torqueA) | Nm | 330 |
Max. loosening torqueA) | Nm | 560 |
Machine screw diameter | mm | M8–M18 |
Tool holder | mm | ∎ ½" |
Weight according to | kg | 1.2–2.2 |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operationC) and during storage | °C | –20 to +50 |
Recommended rechargeable batteries | GBA 18V... | |
Recommended chargers | GAL 18... | |
Data transfer | ||
Bluetooth®D) | Bluetooth® 4.1 | |
Signal interval | s | 8 |
Max. signal rangeE) | m | 30 |
- A)
Measured at 20–25 °C with rechargeable battery ProCORE18V 4.0Ah.
- B)
Depends on battery in use
- C)
Limited performance at temperatures < 0 °C
- D)
The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).
- E)
The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).