Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Lock-off function for On/Off switch |
(2) | Worklight |
(3) | Hex key |
(4) | Spindle lock button |
(5) | Base plate |
(6) | Screw for parallel guideA) |
(7) | Wing bolt for mitre/bevel angle preselection |
(8) | Scale for mitre/bevel angles |
(9) | 45° cut mark |
(10) | 0° cut mark |
(11) | Parallel guideA) |
(12) | Retracting blade guard |
(13) | Adjusting lever for retracting blade guard |
(14) | Chip ejector |
(15) | Protective guard |
(16) | On/off switch |
(17) | Rechargeable batteryA) |
(18) | Handle (insulated gripping surface) |
(19) | Saw spindle |
(20) | Mounting flange |
(21) | Circular saw bladeA) |
(22) | Clamping flange |
(23) | Clamping bolt with washer |
(24) | Battery release buttonA) |
(25) | Dust extraction adapterA) |
(26) | Clamping lever for cutting depth preselection |
(27) | Cutting depth scale |
(28) | Pair of screw clampsA) |
- A)
This accessory is not part of the standard scope of delivery.