Dry vacuuming
Vacuuming up dust deposits
|
|
|
Extracting dust that accumulates from working power tools (see figure H)
- There must be a sufficient air exchange rate in the room when the exhaust air comes back into the room. Be aware of the corresponding national regulations.
The dust extractor has a plug socket with a protective earth contact (3) that can be used to connect an external power tool. Observe the maximum permitted connected load of the connected power tool.
- Fit the extraction adapter (19) see Fitting the extraction adapter (see figure C).
- Insert the dust extraction adapter (19) into the extraction outlet of the power tool.
Note: When working with power tools that have a low air feed into the vacuum hose (e.g. jigsaws, sanders, etc.), the false air intake (32) of the dust extraction adapter (19) must be opened. Only then can the semi-automatic filter cleaning (SFC+) system work without any problems.
To do this, turn the ring above the false air intake (32) until the opening is at its maximum size.
| |
| |
| |
|