Working advice
- Never use the dust extraction attachment without a filter. If the dust extraction attachment is used without a filter, larger particles of drilling dust can be flung towards the user and the power tool can be damaged.
- Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.
- Never carry the power tool by the dust extraction attachment.
- During operation, hold the power tool with fitted dust extraction attachment not on the dust extraction attachment, but always on the handle and auxiliary handle of the power tool.
Note: The guide (2) is spring-loaded. The guide can spring forward when the button (3) for drill bit length adjustment is pressed.
- Hold the power tool firmly with both hands and make sure you have a stable footing. The power tool is more securely guided with both hands.
LED worklight
The LED (4) lights up when the rotary hammer's on/off switch is lightly or fully pressed, meaning that the work area is illuminated in poor lighting conditions.
Europe/Israel
In order for the product to be used as intended in combination with GBH 18V-22, a > 3.0 Ah battery must be used. An LED (4) flashes if a battery with a lower capacity is used.