Working advice
- Never use the dust extraction attachment without a filter. If the dust extraction attachment is used without a filter, larger particles of drilling dust can be flung towards the user and the power tool can be damaged.
- Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any damaged filters immediately.
- Never carry the power tool by the dust extraction attachment.
- During operation, hold the power tool with fitted dust extraction attachment not on the dust extraction attachment, but always on the handle and auxiliary handle of the power tool.
Note: The guide (2) is spring-loaded. The guide can spring forward when the button (3) for drill bit length adjustment is pressed.
- Hold the power tool firmly with both hands and make sure you have a stable footing. The power tool is more securely guided with both hands.
LED worklight
The LED (4) lights up when the rotary hammer's on/off switch is lightly or fully pressed, meaning that the work area is illuminated in poor lighting conditions.
Europe
In order for the product to be used as intended, the rotary hammer must be operated using a > 3.0 Ah battery. An LED (4) flashes if a battery with a lower capacity is used.