Technical Data
Angle grinder | GWS 27-180 PR | GWS 27-230 PR | GWS 27-180 JR | GWS 27-230 JR | |
|---|---|---|---|---|---|
Article number | 3 601 HC6 1.. | 3 601 HC7 1.. | 3 601 HC6 3.. | 3 601 HC7 3.. | |
Rated power input | W | 2700 | 2700 | 2700 | 2700 |
Rated speedA) | min–1 | 8500 | 6500 | 8500 | 6500 |
Max. grinding disc diameter | mm | 180 | 230 | 180 | 230 |
Grinding spindle thread | M 14 | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 25 | 25 | 25 | 25 |
Soft start | ● | ● | ● | ● | |
Restart protection | ● | ● | ● | ● | |
Kickback control | ● | ● | ● | ● | |
Rotatable auxiliary handle | ● | ● | ● | ● | |
Weight according to EPTA-Procedure 01:2014 | kg | 6.1 | 6.3 | 6.1 | 6.3 |
Protection class |
|
|
|
|
/ II- A)
Rated speed for the selection of appropriate application tools in accordance with EN 60745-2-3. The actual rated speed must not exceed the rated speed and is therefore lower.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.