Overview of status indicators

◌

Horizontal position: X- or Y-axis levelling process
Vertical position: X-axis levelling process

◌

Sleep mode activated

●

Horizontal position: Both axes are levelled.
Vertical position: X-axis is levelled.

◌

Automatic shut-down due to error message (e.g. empty rechargeable/non-rechargeable battery, operating temperature exceeded)

◌

CenterFind mode or CenterLock mode started (see operating instructions for the laser receiver)

◌

Position of the measuring tool changed without switching on/off

◌

Self-levelling not possible, end of the self-levelling range

◌

Shock-warning function actuated

◌

Calibration of the measuring tool is started.

●

Horizontal position: At least one axis is tilted or is in manual operating mode.
Vertical position: X-axis is tilted or in manual operating mode.

◌

X-axis levelling process (horizontal and vertical positions)

◌

Y-axis levelling process (horizontal position)

◌

◌

Remote control is being connected via Bluetooth®.
(Both of the status indicators flash alternately.)

●

X-axis is levelled in (horizontal and vertical positions).

●

Y-axis is levelled in (horizontal position).

● (3 s)

● (3 s)

Remote control successfully connected via Bluetooth®

●

X-axis is tilted or in manual operating mode (horizontal and vertical positions).

●

Y-axis is tilted or in manual operating mode (horizontal position).

● (3 s)

● (3 s)

Unsuccessful connection to the measuring tool via Bluetooth®