Technical Data

Cordless Impact Screwdriver		GDR 18V-210 C	GDX 18V-210 C	GDS 18V-210 C
Article number		‎3 601 JJ0 1..‎	‎3 601 JJ0 2..‎	‎3 601 JJ0 3..‎
Rated voltage	V=	18	18	18
No-load speed^A)
Setting 1	min^–1	0–1,100	0–1,100	0–1,100
Setting 2	min^–1	0–2,300	0–2,300	0–2,300
Setting 3	min^–1	0–3,400	0–3,400	0–3,400
Impact rate^A)
Setting 1	min^–1	0–2,200	0–2,200	0–2,200
Setting 2	min^–1	0–3,300	0–3,100	0–3,300
Setting 3	min^–1	0–4,100	0–4,100	0–4,100
Torque^A)
Setting 1	Nm	80	130	90
Setting 2	Nm	160	160	160
Setting 3	Nm	210	210	210
Max. tightening torque^A)	Nm	210	210	210
Max. loosening torque^A)	Nm	–	370	370
Machine screw diameter	mm	M6–M16	M6–M16	M6–M16
Tool holder		¼" internal hexagon	¼" internal hexagon/ ∎ ½"	∎ ½"
Weight^B)	kg	1.4–2.5	1.5–2.6	1.4–2.5
Recommended ambient temperature during charging	°C	0 to +35	0 to +35	0 to +35
Permitted ambient temperature during operation and during storage	°C	–20 to +50	–20 to +50	–20 to +50
Recommended rechargeable batteries		GBA 18V... ProCORE18V...	GBA 18V... ProCORE18V...	GBA 18V... ProCORE18V...
Recommended chargers		GAL 18... GAX 18... GAL 36...	GAL 18... GAX 18... GAL 36...	GAL 18... GAX 18... GAL 36...
Coin cell	V type	3 CR 2032	3 CR 2032	3 CR 2032
Data Transfer
Bluetooth®^C)		Bluetooth® 4.1 (Low Energy)	Bluetooth® 4.1 (Low Energy)	Bluetooth® 4.1 (Low Energy)
Signal interval	s	8	8	8
Max. signal range^D)	m	30	30	30

C): The mobile devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).

D): The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.