Operating Modes

The measuring tool has several operating modes, which you can switch between at any time:

• Cross-line mode: The measuring tool generates a horizontal or vertical laser line pointing forwards. The laser lines cross at a 90° angle.
• Horizontal line mode: The measuring tool generates a horizontal laser line pointing forwards.
• Vertical line mode: The measuring tool generates a vertical laser line pointing forwards.
  If the measuring tool is positioned directly against a wall, the vertical laser line generates an almost completely all-round laser line (360° line).

To change the operating mode, press the button for laser operating mode (2) as often as required until the laser beams are generated in the required operating mode.

All operating modes can be used with both automatic levelling and the incline function.