Storage and transport (see figure K)

Before transporting the dust extractor, remove any full disposal bags or safety filter bags and empty any liquids that have been absorbed, in order to prevent back injuries.
Wrap the power cable around the cable holder (17).
Insert the accessories into the holders provided for them: Suction tubes (33) into the holders (20), crevice nozzle (29) into the holder (21), floor nozzle (32) into the holder (22).
Open the elastic bands of the vacuum hose holder (4) and wrap the vacuum hose (25) around the top part of the dust extractor in the holder (4).
Hook the elastic bands back in.
Only ever carry the dust extractor by the carrying handle (10).
Store the dust extractor in a dry room and secure it so that it cannot be used by unauthorised persons.
Put the castor brake (15) down to hold the castors (16) in place.