Technical data
Wet/dry extractor | GAS 12-40 MA | GAS 12-40 MA | |
|---|---|---|---|
Article number 3 601 JM0 ... | ... 120/... 1F0 | ... 1D0/... 1G0 | |
Rated power input | W | 1200 | 1200 |
Frequency | Hz | 50–60 | 60 |
Container volume (gross) | l | 40 | 40 |
Net volume (dry) | l | 28 | 26 |
Net volume (liquid) | l | 20 | 18 |
Volume of fleece filter bag | l | 19 | 19 |
Vacuum pressureA) | |||
| hPa | 220 | 180 |
| hPa | 230 | 200 |
Flow rateA) | |||
| l/s m3/h | 28 100.8 | 26 93.6 |
| l/s m3/h | 71.5 257 | 70 252 |
Dust class | M | M | |
WeightB) | kg | 14.1 | 14.5 |
Protection class |
|
| |
Protection rating | IPX4 | IPX4 | |
/I- A)
Measured using a vacuum hose 4 m long and 28 mm in diameter
- B)
Weight without mains connection cable and without mains plug
The specifications apply to the specified rated voltages. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.
Plug socket on the dust extractor
Permitted connected load of the connected power tool | |||
|---|---|---|---|
3 601 JM0 ... | Rated voltage | Maximum power | Minimum power |
... 120/... 1F0 | 230 V | 2100 W | 100 W |
... 180/... 1E0/... 1N0 | 220 V | 2100 W | 100 W |
... 1K0 | 220−230 V | 2100 W | 100 W |
... 1L0/... 170 | 220−240 V | 1660 W | 100 W |
... 1H0 | 220 V | 1000 W | 100 W |
... 130 | 230 V | 1100 W | 100 W |
... 1D0/... 1G0 | 127 V | 705 W | 100 W |
... 1C0 | 115 V | 525 W | 100 W |
... 160 | 110 V | 560 W | 100 W |
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take note of the information on the socket of the dust extractor.